BMGZT - HEKTOEN ENTERIC AGAR

Product Identification

Product ID:HEKTOEN ENTERIC AGAR
MSDS Date:09/21/1989
FSC:6550
NIIN:01-246-1915
MSDS Number: BMGZT

Responsible Party
BECTON-DICKINSON MICROBIOLOGY SYSTEMS INC
250 SCHILLING CIR
COCKEYSVILLE, MD 21030
US

Emergency Phone: 301-584-7169

Info Phone: 301-771-0100

Cage: 05545

Contractor
BECTON DICKINSON AND CO MICROBIOLOGY SYSTEMS DIV
HUNT VALLEY, MD 21030-1103 US

Telephone: 410-771-0101

Cage: 05545

Ingredients

SUCROSE

CAS: 57-50-1

RTECS: WN6500000

Fraction By Weight: 4.0%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9192

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE IRRITATION.
SKIN: MAY CAUSE IRRITATION. EYES: MAY CAUSE IRRITATION.
INGESTION: NOT DETERMINED.
Effects of Overexposure:IRRITATION OF THE EYES, SKIN AND RESPIRATORY
TRACT.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH WITH SOAP AND
WATER. EYES: FLUSH WITH WATER FOR 15 MIN.

Fire Fighting

Extinguishing Media:WATERSPRAY
Fire Fighting Procedures:PRODUCT WILL NOT BURN.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:USE PAPER TOWELS TO PICK UP GELLED MATERIAL.
WASH AREA WITH SOAP AND WATER AFTER CLEANUP IS COMPLETED.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:AFTER USE, PREPARED PLATES, SPECIMEN
CONTAINERS AND OTHER CONTAMINATED MATERIALS MUST BE STERILIZED BY
AUTOCLAVING.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:GENERAL AND LOCAL TO MEET TLV REQUIREMENTS.
Protective Gloves:LATEZ GLOVES RECOMMENDED
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:OBSERVE ASEPTIC TECHNIQUES AND ESTABLISHED
PRECAUTIONS AGAINST MICROBIOLOGICAL HAZARDS.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:N1
Appearance and Odor:GELLED MEDIA OF VARIOUS COLORS.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXPOSURE TO FIRE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:OBSERVE ASEPTIC TECHNIQUES AND ESTABLISHED
PRECAUTIONS AGAINST MICROBIOLOGICAL HAZARDS THROUGHOUT ALL
PROCEDURES. FOLLOW ALL APPLICABLE LOCAL, STATE, AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.